Firearm News
Links
Ordering Info.
Products
+ A-Zoom Ammo
+ Books & Manuals
+ Command Arms
+ Fobus Holsters
+ Gun Care
+ Knives
+ Lyman
Handbooks
Moly Products
MuzzleLoaders
Reloading
Sights
Tools
+ Magazines
+ Misc./Surplus
+ Optics
+ Pachmayr
+ TacStar
Sights
No. 2 Tang Sight
Lyman has recreated the sight that the Lyman Gun Sight Company was founded on in 1878. Reintroduced in 1994 for the Winchester 94 Centennial, the No. 2 Tang will fit most new and old 94 models plus these other historic Winchester Models: 1885, 1887, 1890, 62, 62A and 1894. (The No. 2 will also fit other models when adjusted to full height).
For 1995, Lyman introduced a new version of the No. 2 Tang for Marlin Models 336, 1894, 1895 and 30 series lever action rifles.
Like the original, the No. 2 is all steel construction and features height index marks on the aperture post, with a maximum elevation of .800 for long range shooting. It includes both a .093 quick sighting hunting aperture and a .040 Large Disk Target Aperture. Also included is a replacement rear stock screw and front tang screw. (Marlin version features a special adapter which allows mounting on the tang without damaging the serial number)
When mounted, the No. 2 Tang Sight’s greater sight radius means as much as 32% greater inherent accuracy at 100 yards. It provides a clear view of the target and front sight and can be used when the light is too dim for other sights.
No. 2 Tang Sight (Winchester) Item #3902094
New: No. 2 Tang Sight (Marlin) Item #3902100
(Marlin version includes adapter base)
Suggested Retail $76.00 Your Cost $65.95+ $7.50 S&H
#3902094 No. 2 Tang Sight - Winchester
#3902100 No. 2 Tang Sight - Marlin
Click to enlarge
1886 No. 2 Tang Sight
The legendary Lyman #2 Tang Sight is now available for the Winchester 1886 lever action rifle. It fits the original Winchester model 1886 and Browning replicas. Features include height index marks on the aperture post and an .800 maximum elevation adjustment. Also included is a .093 x 1/2" quick-sighting aperture and .040 x 5/8" target disk. Mounting screws and instructions are included. Note: does not fit new rifles with Tang safety.
Item #3902105
#3902105 Suggested Retail $76.00 Your Cost $65.95 + $ 7.00 S&H
Click to enlarge
57 and 66 Receiver Peep Sight
The 66 is for flat receivers, such as lever action rifles, like the Winchester 94, Marlin 336 or modern shotguns.
Suggested Retail $ 79.95 Your Cost $ 66.50 + $ 7.00 S&H
57 WJS - #3572088 - Fits Remington 700, Winchester 70, and Savage 110
57 SME- #3572087- Fits Mauser, Springfield, and White Systems
57 SMET- #3572091- Fits Mauser, Springfield, and White Systems (w Target Knobs)
57 WTR - #3572089- Fits H&R 5200 Sporter and Win. 52
66 WB - #3662265- Fits Winchester 1886 & Copies
66 SKS- #3662236- Fit all SKS Rifles
66 A - #3662214- Fits Old Win. 94 - pre angle eject
66 LA - #3662215- Fits Marlin 336
66 MC - #3662218- Fits Marlin 39A
66 U - #3662249- Universal Shotgun Deer Slug Sight
66 MK - #3662260- Fits Knight MK 85 In-Lines
Click to enlarge
66 WB Receiver Sight for 1886
With the re-introduction of the Winchester and Browning Models of the 1886 Winchester Lever Action came requests for a receiver sight for more precise aiming. The new 66 WB features 1/4 minute audible clicks for windage and elevation and new semi-target knobs for precise adjustments. It is supplied with hunting and target aperture disks and quick release slide.
#3662265 Suggested Retail $76.95 Your Cost $66.50 + $7.00 S&H
Click to enlarge
90 MJT Target Receiver Sight
This sight is designed to mount on Lyman and other mounting bases available for most 22 bolt action rifles. It features audible click detent – target knobs scribed in quarter minute graduations – elevation and windage arrows. Adjustable zero scales and elevation stop screw permit instantaneous return to zero. Quick release slide allows slide to be removed with a press of the release button. Large 7/8" non glare .040 aperture. Elevation adjustable from 1.060 to 1.560 above bore centerline.
#3902050 - Right Hand Suggested Retail $79.95 - Your Cost $65.50 + $7.00 S&H
#3902085 - Bases 540 for 1" receivers Suggested Retail $10.95 - Your Cost $8.95 + $7.00 S&H
#3902090 - Bases 640 for 15/16" receivers Suggested Retail $10.95 - Your Cost $8.95 + $7.00 S&H
Click to enlarge
93 Match Globe Front Sight
The 93 Match Globe Front Sight has been designed to fit any rifle. The 93 match sight (7/8" diameter) mounts on standard dovetail bases, available from Lyman in .562 (American) hole spacing in height of .460. European bases with .860 hole spacing are available from other sources. It is supplied with seven Anschutz size inserts (see below for sizes). The sight height is .550 from the top of the dovetail to the center of the aperture. Hooked locking bolt and nut provide a positive installation while allowing quick removal. Accepts most Anschutz accessories.
#3902035 - Suggested Retail $49.95 - Your Cost $39.95 + $7.00 S&H
Click to enlarge
20 MJT-20 LJT Globe Front Sights
The 20 MJT-20 LJT – 7/8" diameter Globe Front Sights are machined from one solid piece of steel designed to be mounted in a 3/8" barrel dovetail or with Lyman’s 25A dovetail base. 20 MJT height .700", 20 LJT height .825" from the bottom of dovetail to the aperture center supplied with seven Anschutz size steel apertures (see below for sizes).
#3201150 - 20 MJT Suggested Retail $38.95 -Your Cost $29.95 + $6.00 S&H
#3201155 - 20 LJT Suggested Retail $38.95 - Your Cost $29.95 + $6.00 S&H
Click to enlarge
Series 20 MJT-LJT Insert Set
For 20 MJT-LJT, 93 MATCH includes Anschutz size inserts. Two post inserts .067 - .102 wide. Five aperture inserts, .126 - .133 - .154 - .161 - .169 - .177
#3201165 Suggested Retail $14.75 - Your Cost $12.50 + $6.00 S&H
Series 17A Target Front Sights
17 A Target Sights are machined from a solid piece of steel and are designed to be mounted in 3/8"dovetail slots. They are supplied with eight interchangeable inserts (see photo and description) that are locked in place with a threaded cap.
Sight Heights from bottom of dovetail to center of aperture.
17 AHB - .404 Suggested Retail $31.95 - Your Cost $26.95 + $ 7.00 S&H
17 AMI - .494 Suggested Retail $31.95 - Your Cost $26.95 + $ 7.00 S&H
17 AUG - .584 Suggested Retail $31.95 - Your Cost $26.95 + $7.00 S&H
Click to enlarge
Series 17A Insert Set
Set includes two post-type inserts, (.050 and .100 wide), one bead insert (.062) and five aperture-type inserts, (One plastic insert with .120 hole and four steel inserts with .093, .102, .110 and .120 holes).
#3171086 - Suggested Retail $14.25 - Your Cost $12.50 + $6.00 S&H
|
Lippman Enterprises, Ltd. P.O. Box 134 Palenville, N.Y. 12463 E-mail: lippy@lippman-enterprises.com Phone: 518-678-3519 Fax: 518-678-0049 |
|
American Express! 
 |
|