Firearm News
Links
Ordering Info.
Products
+ A-Zoom Ammo
+ Books & Manuals
+ Command Arms
+ Fobus Holsters
+ Gun Care
+ Knives
+ Lyman
+ Magazines
+ Misc./Surplus
+ Optics
+ Pachmayr
+ TacStar
AR-15 Accu wedge
Accu-wedges are one of those essential and important parts of an AR-15 and they do not come installed when you purchase the weapon. This part adds tightness too the weapon and eliminates any unwanted noises. Installation takes a minute and it fits between the receiver and the trigger assembly housing and completely eliminates the play. It fits easily into the slot just below the assembly pin and ensures a very snug reassembly.
Your Cost is $12.00 per dozen + $5.00 S&H
Click to enlarge
AR-15 Magazine Springs "Next Generation"
These replacement springs are made of chrome silicon wire and that is because it has 1000 times the memory of music wire or 17-7 stainless that is mostly used in your magazines. This means that you won't experience the problem that you see with most springs, and that is that after continuous use they loss their ability to function properly which results in feeding problems.
You can load a magazine with one of these springs and have reliable feeding for 20 years! Lastly, all these springs have a Parkerized coat of; zinc Phosphate-this will provide over 72 hours of corrosion protection in a salt spray environment.
Don't ever have to download you magazines ever again.
Your Cost is $5.50 each + $4.00 S&H (Good for up to 5 springs).
Click to enlarge
AR-15 Magazine "Green Followers"
This brand new part will provide you with years of trouble free service. AR-15 Green magazine follower, Mil-Spec. replaces the old black follower to solve your feeding problems. Currently used on all new military contracts. Will not fit the new permanently fixed/blocked 5 & 10 round mags. Will fit the new 7 round and old 30 round mags.
Your Cost $12.00 (dozen) + $5.00 S&H
Quantity Discount Available!
Click to enlarge
Combination Wrench - AR15/M-16 C.A.R. Stock + 1911 Bushing Wrench.
These are all Heat treated Steel. USA Made.
Your Cost $2.25 each + $4.00 S&H (Shipped free if ordered with any other item)
Click to enlarge
AR15/M-16 Stripper Clips
These are all U.S.G.I 50 per pack. USA Made. Due to the weight of these little bundles-if your ordering more than one add 1.50 cents per pack or e-mail for a quote.
Your Cost $6.00 each + $5.50 S&H . Additional packages add 1.50 cents per package.Or contact for a quote!!!!
Click to enlarge
AR15/M-16 Chargers
These are all U.S.G.I. 12 per pack. USA Government Contract Item.
Your Cost $11.95 (per 12 pkg) each + $5.50 S&H
Your Cost $ 1.25 each if purchased individually + S&H
Click to enlarge
AR15/M-16 Repack Kit .223 caliber
This Repack Kit Contains the following items:
1 ea. Bandoleer-new style
12 ea. Strippers
1 ea. charger/loader
4 ea. Cardboards
Your cost is $6.00 + $ 5.00 each S&H (add .50 per extra package)
Click to enlarge
AR15/M-16 A-1 &A-2 Sight Tool
These are all Heat treated Steel. USA Made. Government contract item. This tool can be used on both A-1 and A-2 Models.
Your Cost $7.50+ $4.00 S&H
Click to enlarge
U.S. Mil-Spec'd Black Sling
These are brand new Black Slings 1 1/2" Wide. Made of heavy duty cordura material. They will fit any and all Military and Standard Weapons. These slings are Current Production from a U.S. Govt. Contractor. They are available Black Only. Strong ,durable and will give years of use at a reasonable price.
Cost $5.25 each + 4.25 S&H.
Click to enlarge
Pachmayr Hi-Standard Deluxe Grips
RARE FIND- Hi-Standard Deluxe Rubber Replacement Grips!
This is the one for your Military Citation and other Models.The bottom line is -if your High Standard has the Magazine release in
the BOTTOM FRONT this grip will work! The grip will fit Model 106 to current with the exception of the NUMBER SERIES.
It will not fit the Victor, Sharpshooter or the Sport King. It
will also NOT FIT the Duramatic, M100 M101,or the JC
Higgins model 80. SIMPLY PUT- "Any models with the magazine release under the butt, it will not fit. If the magazine release is at the BOTTOM FRONT it will fit!" Original cost was over $25.00 New and I found the last
150 pair !!
These are New and 100% Satisfaction Guaranteed.
Your Cost $14.95 a pair + $5.50 S&H
Click to enlarge
POST WW II Walther PPK/PP Holster
These are in excellent condition. Made of genuine leather and made to last forever. They will fit any and all Military and Standard Weapons of that particular size and era. They are available Black Only. Strong & durable and will give years of use and service at a reasonable price.
Cost $15.95 each + 6.00 S&H.
Click to enlarge
Hungarian Feg PA63 Leather Holster
These are in excellent-new-surplus condition. Made of genuine leather and made to last
forever. They were manufactured in Hungary in 1963 by Schelli. They will fit the
Feg PA63 and most 9x18 Makarov Pistols , Walther PP's and most Military and
Standard Weapons of that particular size and era. They are available Brown
Leather only. Strong & durable and will give years of use and service at a
reasonable price. You can only imagine what they will look like after leather
conditioner is applied.
Cost $14.95 each + 6.00 S&H.
Click to enlarge
Russian Mosin Nagant Rifle Sling
These are in New-excellent-unused condition.
Real Russian Surplus item. Made of the genuine leather and canvas and made to last forever. They will fit any of the Russian m-44's and family.
Cost $21.95 each + 6.00 S&H.
Click to enlarge
SKS Wooden Stock & Hand guard Set
1911 .45 ACP Replacement Firing Pin
1911 Rubber Replacement Grips for Colt, Kimber, Springfield and Other Models
These are in New and unused condition.
New Hardwood SKS Stock and Hand guard
sets. No metal parts included. Made for Rifles with a Blade Bayonet (
Romanian, Chinese, and Russian) High Quality, final fit and finish
Required.
Cost $12.50 each + 6.50 S&H.
Click to enlarge
These are made for the 1911 Style government pistols. Heat treated tool steel. They have a superior finish for flawless function. These are made so they will maintain consistent ignition with all types of springs. It
is recommended that installation should be carried out by a qualified person.
Cost $3.75 each + 2.50 S&H.
Click to enlarge
Newly Manufactured 1911 Rubber Replacement Grips. Available for full sized and
Commander Size Pistols-Please specify!!!
These were just acquired from a source that manufactures for many existing Major Companies.
These are Black Checkered -Slim-lined, reinforced and supported.
These have the Famous "Double Diamond" design like the Kimber Originals.
Real Beauties, at a fraction of the cost.
Your Cost $10.00 pr. + $5.00 S&H
Click to enlarge
1911 Plastic Replacement Grips for Colt, Kimber, Springfield and Other Models
These are
Newly Manufactured for the U.S. Military by the Current Government
Contractor. These "Surplus" grips are for the full-sized 1911 Models. They are
available in either Black or Brown and please specify when ordering.
Your Cost $8.95 pr. + $5.00 S&H
Click to enlarge
Chapman 9600 Deluxe Professional Gunsmith/Outdoorsman Tools Set
-This 20 piece tool set is the industry standard.
-Guaranteed for life and Made in USA!
-Containing fourteen specialty Slotted Head adapters designed for gun repair work, and one Allen Hex Type adpater for tightening set screws in the handle and extension. All packaged in a hard pack case.
Kit contains the following tools:
1 - Chapman Ratchet
1 - Extension
1 - Screw Driver Handle
14 - Slotted Head Adapters: (Size indicates blade width x thickness)
0.125" x 0.023"
0.230" x 0.037"
0.328" x 0.037"
Spares for:
0.160" x 0.030"
0.250" x 0.025"
0.375" x 0.025"
0.125" x 0.023"
0.190" x 0.025"
0.250" x 0.037"
0.375" x 0.037"
0.160" x 0.030"
0.190" x 0.037"
0.328" x 0.030"
0.375" x 0.050"
1 - Allen Hex Adapter: (Size indicates distance across flats)
.050"
2 - Phillips Head Adapters: (Size indicates standard Phillips numbers)
No. 1
No. 2
Your Cost $25.25 + $6.50 S&H
Click to enlarge
Universal Gun Cleaning Kit (large)
-Real wood storage tray with slotted
compartments.
-Fits the majority of ALL shotguns
,rifles and pistols.
-These kits are all BRAND-NEW!!!CONTAINS:
3 solid brass rods for shotguns,3 solid brass rods for rifles/pistols, 1
universal handle , 1 Universal handle adaptor for rifle/pistol rods, 10 brass
wire brushes to fit 12 gauge,20 gauge,410 gauge, 45 cal. , 40 cal., 357/38 cal.,
9mm, 30 cal., 270 cal., 22 cal., 17 cal.
The kit also contains 5 mops to fit 12 gauge, 20
gauge, 410 gauge, 357/38cal.,22 cal., 2 solid brass adaptors for shotgun
mops/brushes and rifle/pistol brushes and mops, 2 plastic slotted ends for
shotguns and rifle/pistols as well as 50 pieces of 3"x3" cloth cleaning
swabs.
Your Cost $24.50 +$6.50 S&H .
Click to enlarge
Universal HandGun Cleaning Kit
Brand new compact 8 piece Universal Handgun Cleaning Kit.
- 2 pieces solid brass rods
- 1 piece .45 Cal wire brush
- 1 piece .40 Cal wire brush
- 1 piece 9 mm wire brush
- 1 piece .22 Cal wire brush
- 1 piece solid brass slotted end
The Black Compact Case converts into a handle and when finished, all those pieces fit nicely into the case/handle for easy storage. You can take these anywhere and they will stuff nicely into a range bag or field kit.
Your Cost $10.95 + $6.00 S&H .
Click to enlarge
|
Lippman Enterprises, Ltd. P.O. Box 134 Palenville, N.Y. 12463 E-mail: lippy@lippman-enterprises.com Phone: 518-678-3519 Fax: 518-678-0049 |
|
American Express! 
 |
|